Pneumatic shut-off and divert seat valves with Proximity Switches or control head. Valves are operated automatically by a single-acting or a double-acting pneumatic actuator. By supplying compressed air, the shaft is moved to place the valve in “open” or “closed” position. The interchange of normally open and normally closed function can be realized by rotating 180° of the cylinder.
Sanitary Single/Double Seat Valve with Pneumatic Actuator,Proximity Switches.Intellegent control head,AS-I bus
The valve comes as normally closed(NC) in the standard version.it can be changed to normally open (NO) by simply reversing the position of the pneumatic actuator.
Hygienic design according to 3A standards.
Open lantern allows visual inspection of shaft sealing.
Easy assembly/disassembly of internal parts by loosening a clamp fastener.
Standard weld connections (mm or inches).
|Wetted Parts:||AISI 316L, AISI 304|
|Gasket||EPDM acc. to FDA 177.2600|
|Inner suface roughtness||Ra<0.8μm|
Working temperature: -10°C to +120°C(EPDM)/ 14°F ~ 248°F
+140°C (SIP, max.30min) / 284°F
Max. working pressure: 10bar /145PSI
Compressed air pressure: 6-8 bar 87-114PSI
Air connections: G1/8″ (BSP)
Available sizes: DN25-DN100 / 1″- 4″
Gasket: FPM(Vition)(R) in compliance with FDA 177.2600.
Double-acting pneumatic actuator.
External position sensors.
Steam barrier (if shaft sterilization is required).
C-TOP control unit.
Know more.Please download pdf catalogue "sanitary divert valve"