1lb Rack Mounted Extractor with Aluminum Rack
Product Description
1lb Mounted Closed Loop Extractor with Aluminum Rack
Compact design 1lb closed loop extractor with solvent recovery tank,dewaxer column,collection base and movable aluminumn rack.filter siever and condenser coil
| Stainless steel | SS304 |
| Seal | Viton or Buan |
| Filter gasket | 50 to 100 micron |
| Pressure rated | 145PSI |
| Polish | Sanitary mirror polish |
Gaskets are designed for Oil Processing. Temp range (-20+180℃.
Dry ice sleeved material column 3” x 18” . Volume 2000ml. Jacket can be used to pump fluid through to assist in production
1lb closed loop extraction system is used for botanical extraction within a fully sealed and vacuumed system, permitting no solvents to be exposed to the air. Oil bearing solvent is collected in the bottom base of the extractor, The sovlent is then separated or "recovered" leaving behind the purified oil. This unit is a passive unit which employs pressure differences brought on by the regulation of temperature to migrate solvent.