Knowledge

• Some Common Questions for Compression Fittings?

  A compression fitting is a type of coupling used to connect two pipes or a pipe to a fixture or valve. It consists of three parts... the compression nut, the compression ring, and the compression seat. As the nut is tightened, the compression ring is pressed into the seat, causing it to compress aga

  Knowledge October 22, 2021
• What's compression ball valve working pricinple?

  Introduction:Compression bal valve is a kind of mini ball valve with two compression ports. Application:The compression ball valve is widely used in food, chemical, pharmaceutical and many other industries.Features:1. The valve is used for opening or cutting off the flow.2. The ball valve could not

  Knowledge October 19, 2021
• What's Union?

  UnionUnion is a pipe connector that can be easily installed and disassembled. It mainly consists of a nut, a male, a liner, and a seal. To make an effectively working pipe fitting, both the male and female ends are sealed together with the help of nuts. Union makes pipeline connection becomes simple

  Knowledge October 14, 2021
• Introduction for Cartridge Micro Filter

  IntroductCartridge Micro Filter could filter particles and bacteria bigger than 0.1μm in liquid or gas. It has the advantages of high filtration accuracy, fast transition speed, less adsorption, no media shedding, acid and alkali corrosion resistance, and convenient operation. Now, it plays an impor

  Knowledge September 27, 2021
• What's Manhole?

  IntroductionManhole is a door which should be installed on a sealing vessel. And engineers could go inside the vessel through the manhole, so that they can clean, maintenance and installation inside the vessel. A manhole has a short tube, flange, cover with handle, and other parts. We have SS304 and

  Knowledge September 23, 2021
• Introduction about EPDM seal

  IntroductionEPDM stands for Ethylene Propylene Diene Monomer, a synthetic rubber used in a range of applications. EPDM is used most commonly used in the automotive and construction industries for various seals due to its excellent resistance to environmental factors such as Ozone, UV and general wea

  Knowledge September 14, 2021
• Why we choose FKM gasket for closed loop extractor?

  Our seals could be made of EPDM, SILICONE, FKM, and PTFE. While we only supply FKM seals for our closed loop extractors. What’s FKM gasket?Fluoro-Elastomer was originally developed by Du Pont. And VITON™ is their official trademark name. While now, their are multiple companies that produce Viton, th

  Knowledge September 11, 2021
• 3 Methods for Ethanol Extraction

  Ethanol is a popular solvent for BHO, CBD, and THC extraction. Now, I am going to introduce you 3 methods about ethanol extraction.

  Knowledge September 08, 2021
• Introduction of a closed loop extractor

  Introduction of a Closed Loop ExtractorThis is a sample inroduction for a closed loop extractor. I hope this article can hepl newers to know more about closed loop extractors.Before we use a closed loop extractor, we should never forget to use a vacuum pump to exhaust the air in the extractor. As mo

  Knowledge June 08, 2021
• What's Diamond Miner

  RecrystallizationFirst and foremost, this is all basic organic chemistry, in this case, the process called “recrystallization.” There are several other names, two primary ones being Diamond Mining and Jar Tech. Diamond Mining refers to the end product, and Jar Tech refers to the technique for achiev

  Knowledge July 23, 2021